Tool for Replacing Neck Gaskets on Drysuits and Drytops (1" spring clamps sold separately, 6 required)

Tool for Replacing Neck Gaskets on Drysuits and Drytops (1

Tool for Replacing Neck Gaskets on Drysuits and Drytops (1" spring clamps sold separately, 6 required)

$ 49.00 USD

Drysuit Neck Gasket Replacement Tool with illustrated instructions included makes it easy to do a professional looking job when replacing your dry suit neck gasket. This neck tool is lightweight and reusable so you can bring it on expeditions and replace gaskets at camp (for sea kayakers, the tool fits nicely flat against a front bulkhead and a little tape will hold it there till needed).

Buy this tool and you'll make lots of friends.

This item consists of the "base plate" and a pair of "split rings" only -- spring clamps are sold separately since some people already own clamps for woodworking etc. To use, cut the old gasket off even with the edge of the fabric (leaving about a 1" flange of the old gasket glued to the fabric, then tack the neck opening down to the double sided tape on the base plate, apply glue to the flange of old gasket, sandwich the new gasket between the base plate and the split rings and clamp it all together.

To complete this kit, you will need six 1" Steel Spring Clamps (as well as AquaSeal® Adhesive, clean 220grit sandpaper, isopropyl alcohol, and gaskets). Use the "Continue Shopping" button to find these clamps, and be sure to set the quantity of the clamps to six.